Maintenance Kit - Lexmark E450DN User Manual

6
Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge
assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it
will go.
7
Close the front door.
8
Turn the printer back on.
9
Reset the photoconductor counter (see the instruction sheet that shipped with the new photoconductor kit).
Note: Print your printer menu settings pages. For more information, see Printing the menu settings page
on page 27. If Photoconductor is listed under Warnings, the photoconductor counter has not been
properly reset.

Maintenance kit

80 Scheduled Maintenance appears on the display after 120,000 pages have printed to let you know it is time to replace
printer maintenance items. Order a maintenance kit when 80 Scheduled Maintenance first appears on the display. The
maintenance kit contains all the items necessary to replace the pick rollers, the fuser, and the transfer roller.
Note: The maintenance kit may not be available in all geographies.
See the following table for the maintenance kit part number for your specific printer.
Machine voltage
110 V
220 V
100 V
Maintaining the printer
Part numbers
40X2847
40X2848
40X2849
Ordering supplies
43