Operator panel codes
Below are explanations of what the primary light sequences, or codes, and secondary error codes mean and what you can
do to clear them.
Primary codes
Ready / Power Saver
Light sequence:
•
Ready—On
What this light sequence means:
•
The printer is ready to receive and process data.
•
The printer is in Power Saver mode.
What you can do:
•
Send a print job.
•
Press Continue
printer settings.
•
Press and hold Cancel
Note: If you want to change the Power Saver setting, it can only be
Operator panel codes
to print the menu settings pages for a list of current
to reset the printer.
set from the Local Printer Setup Utility (see Using the Local
Printer Setup Utility on page 74).
49