Programming engine code / Programming system code
Light sequence:
•
Ready—On
•
Toner Low/Replace PC Kit—On
•
Load Paper—On
What this light sequence means:
New code is being programmed into the engine or firmware code flash.
What you can do:
Wait for the message to clear. When the printer has finished programming the code,
it performs a soft reset.
Cancel job / Reset printer
Light sequence:
•
Continue—On
•
Ready—On
•
Toner Low/Replace PC Kit—On
•
Load Paper—On
•
Paper Jam—On
•
Error—On
What this light sequence means:
•
The current print job is canceled.
•
The printer is resetting to the user default settings. Any active print jobs are
canceled. A user default setting remains in effect until you change it or until
you restore the factory default settings.
What you can do:
Wait for the message to clear.
Operator panel codes
58