Font error
Light sequence:
•
Continue—On
•
Toner Low/Replace PC Kit—Blink
•
Error—On
What this light sequence means:
The printer has received a request for a PPDS font which is not installed.
What you can do:
•
Press and release Cancel
•
Press and hold Cancel
•
Press Continue
Host interface disabled
Light sequence:
•
Continue—On
•
Load Paper—Blink
•
Paper Jam—Blink
•
Error—On
What this light sequence means:
The printer USB or parallel port has been disabled.
What you can do:
•
Press Continue
jobs previously sent. Enable the USB or parallel port by selecting a value
other than Disabled for the USB Buffer or Parallel Buffer item in the Local
Printer Setup Utility (see Using the Local Printer Setup Utility).
Operator panel codes
to cancel the print job.
to reset the printer.
to clear the message and continue printing.
to clear the message. The printer discards any print
66