Print side two of a duplex job
Light sequence:
•
Continue—Blink
•
Load Paper—On
What this light sequence means:
Print the other side of your duplex print job.
What you can do:
•
Reinsert your print job in tray 1 using the instructions in the driver pop-up
menu to orient the pages correctly. Press Continue
printing.
•
Press and hold Cancel
Toner low
Light sequence:
•
Toner Low/Replace PC Kit—On
What this light sequence means:
The printer is ready to receive and process data. In addition, the toner in the toner
cartridge is getting low.
What you can do:
•
Press Continue
printer settings.
•
Remove the toner cartridge and shake it to extend the life of the cartridge.
•
Replace the toner cartridge. (See How to change a toner cartridge on
page 78 for help.)
•
Press and hold Cancel
Note: This light will not come on if the starter toner cartridge is
Operator panel codes
to reset the printer.
to print the menu settings page for a list of current
to reset the printer.
installed.
to resume
54