Table of Contents
Advertisement
10. REGISTRATION
10.1
Expand your telephone system
The handset provided within your product package is already registered as
HANDSET 1. You can add new handsets (LS6001A, purchased separately) to
your telephone base. Your telephone base can support up to five handsets. Each
handset must be registered to the telephone base before use. Additional handsets
are assigned numbers in the sequential order they are registered (up to
HANDSET 5).
10.2
Add and register a handset
When first purchased, each expansion handset alternately shows To register HS...
and ...see manual. The new handset should be charged without interruption for at
least 30 minutes before registering it to the telephone base.
To register a handset:
1.
At the bottom of the telephone base,
press and hold PAGE for about four seconds
until it shows Registering...
2.
On the cordless handset, press # then it
shows Registering... Both the telephone
base and cordless handset show Registered
and you hear a beep when the registration
process completes. The registration process
takes about 60 seconds to complete.
If registration fails, the handset displays Failed.
Please start again from Step 1 above.
notes
•
You cannot register a handset if any other system
handset is in use.
•
If you have not set the date and time for the telephone
system, the handset will prompt you to set the date and
time after it is registered to the base. To skip setting,
press CANCEL.
42
Advertisement
Table of Contents
