Table of Contents
Advertisement
The answering
system does not
record messages.
The answering
system does not
announce the
correct day of the
week for recorded
messages time
stamp.
The messages
on the answering
system are
incomplete.
Common cure
for electronic
equipment.
This telephone is not equipped with a grounding function. Therefore, some of the
functions may be limited when used in PBX systems.
Please contact the technical support of the network provider for further information.
•
Make sure the answering system is on. When the
answering system is on, ANS ON should display on the
handset and the telephone base.
•
When the answering machine memory is full, it does not
record new messages until some old messages are deleted.
•
If you subscribe to voicemail service, change the
number of rings so that your answering system
answers before your voicemail service answers. To
determine how many rings activate your voicemail
service, contact your telephone service provider.
•
Make sure you have set the date and time.
•
If a caller leaves a very long message, part of it may be
lost when the answering system disconnects the call
after the preset recording time.
•
If the memory on the answering system becomes
full during a message, the answering system stops
recording and disconnects the call.
If the telephone is not responding normally, put the
handset in the telephone base. If it does not respond, try
the following (in the order listed):
•
Disconnect the power to the telephone base.
•
Disconnect the batteries on the handset.
•
Wait a few minutes before connecting power to the
telephone base.
•
Re-install the batteries and place the handset in the
telephone base.
•
Wait for the handset to synchronize with the telephone
base. Allow up to one minute for this to take place.
47
Advertisement
Table of Contents
