Midi Command Settings - Ruin & Wesen Midi Command User Manual

Ruin & Wesen Electronics

Midi Command settings

To edit the settings of the Midi Command, press the shift button (4) and hold it down, and while keeping it down, hold the
menu encoder (3) down. After approximately 1 second, the Midi Command will enter the settings menu. The settings
menu edits the settings of the current patch.
To change the edited patch, hold the shift button (4) down and turn the menu encoder (3). The changes to the current
patch settings will not be saved when loading a new patch. To exit the settings menu without saving the settings, hold
the shift button (4) down and double-click the menu encoder (3). The Midi Command will go back to the current page. To
exit the settings menu and save the settings, hold the shift button (4) down and press the menu encoder (3) for about 1
seconds. The Midi Command will save the modifications made to the current patch and go back to the current page.
Midi Command Documentation
MENU
PAGE TYPES
Press for 1 second to enter settings menu
Entering the Settings menu
PAGE 3
MIDI PAGE
Double-click to leave settings menu without saving
Leaving the settings menu without saving
Hold shift button
Hold shift button
9