Ruin & Wesen Midi Command User Manual page 26

Ruin & Wesen Electronics
Midi Byte
(Sysex Header)
0x03
firmware length (3 bytes)
firmware checksum (2 bytes)
0xF7
Midi Command Messages
Send Page message
This message is used to update a page (but not save it to the Midi Command's patch memory). If the page is in another
patch than the current patch, this message has no effect.
Midi Byte
(Sysex Header)
0x11
patch number
page number
page type
page data (8bit data)
0xF7
Save Page message
This message is similar to Send Page, but the page is stored in patch memory.
Midi Byte
(Sysex Header)
0x14
patch number
page number
Midi Command Documentation
Purpose
CMD =
CMD_FIRMWARE_CHECKSUM
16 bit firmware length= length[0] <<
14 | length[1] << 7 | length[2]
14 bit firmware checksum =
checksum[0] | checksum[1] << 7
MIDI Sysex END
Purpose
CMD = CMD_SEND_PAGE
patch number of page (from 1 to 8)
Page number (from 0 to 3)
page type: 0 for MIDI page, 1 for MD
Reverb page, 2 for MD Echo page, 3
for MD EQ page, 4 for MD
Compressor page)
8-bit encoded page data (see section
"Page formats" below)
MIDI Sysex END
Purpose
CMD = CMD_SAVE_PAGE
patch number of page (from 1 to 8)
Page number (from 0 to 3)
26