Ruin & Wesen Midi Command User Manual page 22

Ruin & Wesen Electronics
Once the correct input and output devices have been chosen, Ableton will update the parameter names on the Midi
Command. The first page of patch 1 shows the volumes of the first 4 tracks:
Track numbers
Volume
The second page of patch 1 shows parameters of the currently selected track. It allows you to control the current track's
volume and the first send. Furthermore, if the track contains an EQ (either the 8 parameter EQ or the 3 parameter EQ), it
allows you to control the volume of the low and high frequencies of the last EQ in the track.
Send A
Track volume
The third and fourth page of patch 1 allow you to control the best-of bank parameters of the currently selected device.
When selecting a device, the Midi Command flashes the name of the newly selected device and updates the parameter
names accordingly. For example, when selecting a Compressor device, page 3 looks like the following picture:
Midi Command Documentation
LV1 LV2 LV3 LV4
110 110 110 110
Turn encoder to adjust track volume
LEV SD1 LP
107 000 107 107
HP
Low volume
High volume
22