Mid Type Page Settings - Ruin & Wesen Midi Command User Manual

Ruin & Wesen Electronics

MID type page settings

MID type pages have two settings pages. The first page shows the name of the parameter on the first line of the display,
and the selected CC value on the second line. To change the CC value, turn the encoder corresponding to the
Parameter names
CC number
parameter. Be careful not to press the encoder as this will change the edited page.
Pressing the encoder corresponding to the selected page again will switch to the second MID type settings page.
The second page shows the name of the parameter on the first line of the display, and the MIDI channel of the CC
message on the second line. To change the MIDI channel, turn the encoder of the corresponding parameter. Be carefu
not to press the encoder as this will change the edited page.
Midi Command Documentation
C01 C02 C03 C04
001 002 003 004
Turn encoder to adjust CC number
Edit MIDI page CC numbers
EDIT PAGE 1 (2)
MIDI PAGE
Press page encoder a second time to enter second page
Editing second MIDI page
13