Ruin & Wesen Midi Command User Manual page 11

Ruin & Wesen Electronics
The type of each page can be adjusted by turning the corresponding control encoder (2). The new type will be displayed
on the display. Changing the type of a page will reset the parameters values to the default values. Be careful when
changing the types of a page (you can always cancel the change by holding shift down and double-clicking the menu
encoder to leave the Settings mode).
You can also activate or deactivate the display backlight while in the page type submenu. Hold the menu encoder down
for 1 second to toggle the LED backlight.
Midi Command Documentation
PG1 PG2 PG3 PG4
ECH REV EQ
Turn control encoders to adjust page type
Changing page types
PG1 PG2 PG3 PG4
MID MID MID MID
Hold for 1 second to activate backlight
Toggling the LED backlight
MID
11