Chapter 4: Scanner Option Setup; Positioning The Scanner - Lexmark C772n Setup Manual

4
Scanner option setup
This chapter includes information on setting up the MFP (scanner).
To assemble this option, you should have the following components:
•
Printer
• 4600 MFP option (scanner)
• Printer memory or option cards
The setup for this portion of the book covers:
1

Positioning the scanner

2
Installing memory options
3
Installing the printer
Positioning the scanner
1
Remove the scanner base from the carton.
2
Place the scanner base on a table, scanner cabinet, or other flat surface.
3
Align the hinges on the scanner top with the slots in the scanner, and then lower the scanner top onto the scanner.
For information on removing the scanner top, see "Removing the scanner top" in the User's Guide located on
the Software and Documentation CD.
4
Connect the two scanner cables.
Note: To prevent errors and scanner malfunction, make sure the scanner cable thumbscrews are tightened
securely.
5
Go to Removing the print cartridge packaging on page 16, and follow the printer setup instructions. For
information on installing the interface card and memory and firmware cards, go to Installing printer memory or
option cards on page 19.
Scanner option setup
15