Installing Drivers - Lexmark C772n Setup Manual

5
Connect the power cord to the printer and scanner.
Note: Use the power cord from the scanner box.
6
Connect the power cord to the scanner.
• Use the power cord from the printer box
• If you have a 2000-sheet drawer, connect the scanner and drawer together using the 2000-sheet drawer
power cord.
7
Plug the power cord into a properly-grounded outlet.
If you have a 2000-sheet drawer, connect the power cord into the 2000-sheet drawer, and then into a properly
grounded outlet.
Step 5

Installing drivers

1
Turn on your computer and any other peripherals.
2
Place the printer Software and Documentation CD in the computer CD drive, and follow the onscreen instructions
to install the printer drivers.
3
Place the 4600 MFP Software and Documentation CD in the computer CD drive, and follow the onscreen
instructions to install the MFP drivers.
4
Verify the computer recognizes your installed options.
a Open the Printers folder.
b Right-click the new MFP and select Properties.
c Select the tab that contains installable options.
This may be Install Options, Device Settings, Device, or Options depending on your system.
d Add the installed options.
Scanner setup
1
2
Installing drivers
27
Step 6