Remote Controller - Vivax ACP-09CH25ZNM User Manual

REMOTE CONTROLLER

OPERATION DISPLAY
It displays the current
settings.
OPERATION
MODE button
Press it to select operation
AUTO COOL
mode:
HEAT FAN
TEMPERATURE
ADJUSTMENT buttons
Press once, the setting
temperature increases by 1 .
Press once, the setting
temperature decreases by 1 .
The range of setting
temperature is 16-31 .
RUN/STOP button
Turns unit ON/OFF.
FAN SPEED button
Press it to change the fan speed
in the order of low-medium-high
-auto (
SLEEP button
Press it to start sleep running
and press again to stop it.
NOTICE:
Cool only type has no HEAT mode.
To operate, the distance should be within 6 meters from the indoor unit with a clear
line of sight.
Remove the batteries if the remote controller is not to be used for long periods of time.
In this illustration, all displays are ON for the purpose of explanation. Some models
may not show all these indications.
Don't tear the batteries apart or throw them into fire, which will lead to irreparable damage.
Signal ejecting window
It sends signals to the indoor unit.
DRY
I/O
).
SWING
MANUAL
OPERATION
MODE
OFF ON
TIME
CANCEL SET
SLEEP
FAN SPEED
1
SWING button
Press it to change up/down air
flow direction and the deflector
automatically swings up and
down.
MANUAL
SWING button
Press it to change up/down air
flow direction and the deflector
moves at a certain angle. You
can change the moving angle
in the order of:
(1) (2) (3)
TIMER ON button
"
Please see AUTO-ON/OFF
".
timer operation
TIMER OFF button
"
Please see AUTO-ON/OFF
".
timer operation
TIMER SET button
Press it to fix the timer setting.
TIMER
CANCEL button
Press it to cancel the timer
setting.
RESET pieces
If the remote controller can't
work normally, short the two
RESET pieces, it will be OK.
(5)
(4)