Vivax ACP-09CH25ZNM User Manual page 111

AUTO-ON/OFF TIMER OPERATION
AUTO-ON/OFF timer operation set
1.
Press button
TIMER function. Meanwhile, "
Press button
TIMER function. Meanwhile, "
2.
Every press of button
one hour (12 hours at most) and the digits of AUTO-ON/OFF time will
appear on the display.
3.
Press button
stop flashing on the remote controller display.
AUTO-ON/OFF timer operation cancellation
If you want timer operation cancelled, press button
AUTO-ON/OFF time and "
controller display.
NOTICE:
1.
TIMER ON/OFF operation must be set again after a power failure.
2.
Once the AUTO-ON/OFF time is fixed, if you want to change it, you
should cancel the previous AUTO-ON/OFF timer operation.
3.
If you press the button
time is fixed, the system will count time anew based on the current
display time.
OFF
when the air conditioner is on to initiate the AUTO-OFF
¡ ±
ON
when the air conditioner is off to initiate the AUTO-ON
¡ ±
ON
or
¡ ±
to set the AUTO-ON/OFF time. The " " or "
SET
once incautiously after the AUTO-ON/OFF
SET
"of " " starts to flash on the display.
" o f " " starts to flash on the display.
OFF
increases the AUTO-ON/OFF time by
¡ ±
"or " " disappear on the remote
2
until the digits of
CANCEL
¡ ±
" will