Vivax ACP-09CH25ZNM User Manual page 105

Icon illustrations:
SLEEP MODE
COOL MODE
FAN MODE
AUTO MODE
RUN INDICATOR LAMP
HIGH FAN SPEED
Continuing research results in steady improvement. Therefore, This information
and these specifications are subject to change without notice.
3.EMERGENCY OPERATION SWITCH
In case the batteries in the remote controller are wore out, or remote controller is at fault, use
Emergency operation switch
A.
Cooling only type
Every time the switch is pressed, it changes in sequence of COOL
Heat pump type
Every time the switch is pressed, it changes in sequence of COOL
The following table shows the condition of set temperature, fan speed and deflector during
emergency operation.
Mode
Cooling
Heating
4.HORIZONTAL LOUVER BLADE
Hold the knob and move the deflector to change right/left airflow direction. Be careful not to adjust
the deflector during operation as the fan is rotating at a high speed and may pinch your fingers.
INDOOR TEMPERATURE
REMOTE SIGNAL RECEIVER
( ).
B. C.
Set temperature
24 C
24 C
SETTING TEMP or INDOOR TEMP DISPLAY
DRY MODE
SET TIMER MODE
MIDDLE FAN SPEED
Fan speed
High
High
NAME OF PARTS
ELECTRIC-HEAT MODE
SETTING TEMPERATURE
HEAT PUMP MODE
LIGHT-WAVE MODE
LOW FAN SPEED
Check switch
(Please leave this
button to be used
by the maintenance
staff)
STOP.
HEAT
Deflector
Swing
Swing
Emergency
Operation switch
STOP.
6