Setting Up The Handset For Use; Attaching The Belt Clip - Gigaset S820H User Manual

Touch & type
Hide thumbs Also See for S820H:
Table of Contents

Advertisement

Setting up the handset for use

The handset's display and keys are covered with a protective film.
Please remove the protective film.
Caution
Please do not use any touchscreen styli to operate the handset.
Do not use any protective sleeves/films from other manufacturers,
as they may restrict the operation of your handset.
Inserting the rubber seal for the USB plug socket
Open the battery cover and insert the rubber seal into the
groove.
Inserting the battery and closing the battery cover
Caution
Use only rechargeable batteries (
GmbH, as this could otherwise result in significant health risks and personal injury. For
example, the outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries that are not
of the recommended type.
¤
Insert the batteries with
the polarity in the correct
direction.
The polarity is indicated in the
battery compartment.

Attaching the belt clip

The handset has notches on each side to attach the belt clip. Press the
belt clip onto the back of the handset so that the protrusions on the
belt clip engage with the notches.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
¢
page 47) recommended by Gigaset Communications
¤
Insert the battery cover
from above.
¤
Then press the cover until
it clicks into place.
Getting started
To reopen the battery cover
to replace the battery:
¤
Insert your fingernail into
the notch on the top of the
cover and push down-
wards.
5

Advertisement

Table of Contents
loading

Table of Contents