Security Switch Snmp Trap Community; Security Switch Snmp Trap Destination; Security Switch Snmp Trap Ipv6 Destination - Planet WGSW-20160HP User Manual
16-port gigabit 802.3at poe+ 4g tp/sfp combo managed switch
Hide thumbs
Also See for WGSW-20160HP:
- User manual (563 pages) ,
- Command manual (433 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
Security Switch SNMP Trap Community
Description:
Set or show the community string for SNMP traps.
Syntax:
Security Switch SNMP Trap Community [<community>]
Parameters:
<community>: Community string. Use 'clear' or "" to clear the string
Maximum length allowed is upto 256 characters.
(default: Show SNMP trap community)
Default Setting:
public
Security Switch SNMP Trap Destination
Description:
Set or Show the SNMP trap destination address.
Syntax:
Security Switch SNMP Trap Destination [<ip_addr_string>]
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
Security Switch SNMP Trap IPv6 Destination
Description:
Set or Show the SNMP trap destination IPv6 address.
Syntax:
Security Switch SNMP Trap IPv6 Destination [<ipv6_addr>]
Parameters:
<ipv6_addr>: IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way
of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example,'::192.1.2.34'.
User's Manual of WGSW-20160HP
397
Advertisement
Table of Contents
