Upnp Command; Upnp Configuration; Upnp Mode; Upnp Ttl - Planet WGSW-20160HP User Manual

6.18 UPnP Command

UPnP Configuration

Description:
Show UPnP configuration.
Syntax:
UPnP Configuration

UPnP Mode

Description:
Set or show the UPnP mode.
Syntax:
UPnP Mode [enable|disable]
Parameters:
enable : Enable UPnP
disable: Disable UPnP
(default: Show UPnP mode)
Default Setting:
disable

UPnP TTL

Description:
Set or show the TTL value of the IP header in SSDP messages.
Syntax:
UPnP TTL [<ttl>]
Parameters:
<ttl>: ttl range (1..255), default: Show UPnP TTL
Default Setting:
4
User's Manual of WGSW-20160HP
494