Security Switch Snmp User Add; Security Switch Snmp User Delete - Planet WGSW-20160HP User Manual

Security Switch SNMP User Add

Description:
Add SNMPv3 user entry.
The entry index key are <engineid> and <user_name> and it doesn't allow modify.
Syntax:
Security Switch SNMP User Add <engineid> <user_name> [MD5|SHA] [<auth_password>] [DES] [<priv_password>]
Parameters:
: Engine ID, the format may not be all zeros or all 'ff'H and is restricted to 5 - 32 octet string
<engineid>
: A string identifying the user name that this entry should belong to. The name of "None" is reserved.
<user_name>
The allowed string length is (1-32), and the allowed content is ASCII characters from 33 to 126
: An optional flag to indicate that this user using MD5 authentication protocol. The allowed length is
md5
: An optional flag to indicate that this user using SHA authentication protocol. The allowed length is
sha
(8-40), and the allowed content is ASCII characters from 33 to 126
<auth_password>: A string identifying the authentication pass phrase
: An optional flag to indicate that this user using DES privacy protocol privacy protocol should belong to.
des
The allowed string length is (8-32), and the allowed content is ASCII characters from 33 to 126
<priv_password>: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII characters from 33 to 126

Security Switch SNMP User Delete

Description:
Delete SNMPv3 user entry.
Syntax:
Security Switch SNMP User Delete <index>
Parameters:
<index>: entry index (1-64)
(8-32), and the allowed content is ASCII characters from 33 to 126
User's Manual of WGSW-20160HP
403