Mellanox Technologies SX6005 User Manual page 76

6. Stacking the Chassis
7. Redundant Power Supply Connection - Electrical Hazard
8. Multiple Power Inlets
9. During Lightning - Electrical Hazard
10. Copper InfiniBand Cable Connecting/Disconnecting
11. Rack Mounting and Servicing
12. Equipment Installation
76 Mellanox Technologies
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
This product includes a redundant power or a blank in its place. In case of a blank
power supply, do not operate the product with the blank cover removed or not securely
fastened.
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the switch
platform.
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for spe-
cial warnings/instructions.
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
This equipment should be installed, replaced, and/or serviced only by trained and qual-
ified personnel.