Leckey Kidwalk User Instructions page 9

7.2 Changing the
wheel position
Move the wheel lock before changing the
wheel position.
The wheel lock is pre-set to the centre wheel
position. To change the position of the wheel
lock, remove the thumb screw (A). Move the
wheel lock forward or rearward to coincide
with the new wheel position. Align the
threaded hole for the for the thumb screw with
the front or the rear hole. Attach the thumb
screw and tighten securely.
There are three mounting positions (B) for
the large wheels. To move the wheels to a
new location pull outward on the wheel while
pressing the axle pin button and remove the
wheel from the frame. While pressing the
axle button, insert into a new location. After
locating the wheel make sure that the axle has
fully engaged.
Safety first
Make sure the wheel locks are adjusted
and able to be locked properly prior to use.
B
A