Leckey Kidwalk User Instructions page 8

7.1 Attaching and
Removing the wheels
First press the button at the end of the axle
and remove the spacer (A) (Size 1 only).
Push the button (B) at the end of the axle
to allow the axle to slide through the wheel
bearings. The axle should be inserted
from the recessed side of the wheel. Once
inserted, release the button and the wheel
is secure. For size 1 the spacer should
then be replaced onto the axle. Repeat this
procedure on the other wheel.
There are three mounting positions (C) for the
large wheels. While pressing the axle button,
insert the axle into one of these positions.
Make sure that the axle has fully engaged
and release button.
To remove the wheels, press the axle button
and slide the wheel and axle off the frame.
B
A
C