Lexmark X644E Menus And Messages Manual page 106

Message
64 Unsupported disk
format
80 Scheduled maintenance
advised
88 Toner is low
200.yy Paper jam, check
[area name]. Leave paper
in bin.
200.yy Paper jam,[x]
pages jammed. Leave
paper in bin.
201.yy Paper jam, check
[area name]. Leave paper
in bin.
201.yy Paper jam,[x]
pages jammed. Leave
paper in bin.
202.yy Paper jam, check
[area name]. Leave paper
in bin.
202.yy Paper jam,[x]
pages jammed. Leave
paper in bin.
231.yy Paper jam, check
[area name]. Leave paper
in bin.
Understanding MFP messages
Meaning
The hard disk format is not supported. Format the hard disk prior to performing
Service is required to maintain printer
performance.
The toner cartridge is running low on
toner.
There is a single jam in the specified
area indicated by area name.
There is a multiple jam. x indicates
the number of jammed sheets of print
media.
There is a single jam in the specified
area indicated by area name.
There are multiple jams. x indicates
the number of jammed sheets of print
media.
There is a single jam in the specified
area indicated by area name.
There are multiple jams. x indicates
the number of jammed sheets of print
media.
There is a single jam in the specified
area indicated by area name.
Attendance messages
106
Action
operations that require the hard disk.
If the message remains, the hard disk may be
defective and require replacing.
Replace the maintenance items and if
necessary, reset the printer maintenance
counter.
Replace the toner cartridge if the toner low
alarm sounds.
Touch Continue to clear the message if the
toner low alarm does not sound.
1 Open the upper and lower front doors.
2 Remove the print cartridge to access the jam,
and clear it.
3 Close the doors.
4 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the upper and lower front doors.
2 Remove the print cartridge to access the jam,
and clear it.
3 Close the doors.
4 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the upper and lower front doors.
2 Remove the print cartridge to access the jam,
and clear it.
3 Close the doors.
4 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the upper and lower front doors.
2 Remove the print cartridge to access the
jams, and clear them.
3 Close the doors.
4 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the rear door.
2 Clear the jam, and close the rear door.
3 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the rear door.
2 Clear the jams, and close the rear door.
3 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the duplex unit cover.
2 Clear the jam, and close the duplex unit.
3 Touch Continue. If all print media is cleared
from the path, the job resumes printing.