Using The Lcd Touch-Screen Buttons - Lexmark X644E Menus And Messages Manual

Lexmark all in one printer user manual
Hide thumbs Also See for X644E:
Table of Contents

Advertisement

Button
Cancel
Jobs

Using the LCD touch-screen buttons

The following section provides information on navigating through several screens. Only a few are chosen to demonstrate
the use of the touch-screen buttons.
Using MFP menus
Button name
Function
Unlock Device
This button appears on the screen when the MFP is locked. The
control panel buttons and shortcuts cannot be used while it appears
and no default copy starts may occur.
To unlock the MFP:
1 Touch Unlock Device to open a PIN entry screen.
2 Enter the correct PIN to unlock the numeric keypad (0–9) and the
Backspace button on the control panel.
Note: If an invalid PIN is entered, Invalid PIN. appears. A pop-up
screen appears with the Continue button. Touch Continue. The home
screen returns with the Unlock Device button.
Cancel Jobs
To open the Cancel Jobs screen. The Cancel Jobs screen shows any
of the following items under three headings on the screen which are
Print, Fax, and Network:
• print job
• copy job
• fax
• profile
• FTP
• e-mail send
Each heading has its own list of jobs shown in a column under the
heading. Each column can only show three jobs per screen. The job
appears as a button. If more than three jobs exist in a column, then the
down arrow appears at the bottom of the column. Each touch of the
down arrow accesses one job in the list. When more than three jobs
exist, once the fourth job in the list is reached, then an up arrow
appears at the top of the column. For illustrations of the up and down
arrow buttons, see Information on LCD touch-screen buttons on
page 13.
To cancel a job, see the User's Guide for instructions.
Using the LCD touch-screen buttons
10

Advertisement

Table of Contents
loading

Table of Contents