Lexmark X644E Menus And Messages Manual page 102

Message
34 Short paper
35 Insufficient memory
to support Resource Save
feature
37 Insufficient memory
for Flash Memory
Defragment operation
37 Insufficient memory
to collate job
37 Insufficient memory,
some held jobs were lost
37 Insufficient memory,
some Held Jobs were lost
38 Memory full
Understanding MFP messages
Meaning
The length of the print media is too
short to print the formatted data.
The MFP lacks the memory needed
to enable Resource Save. This
message usually indicates too much
memory is allocated for one or more
of the MFP link buffers.
The MFP cannot defragment flash
memory because the memory used to
store undeleted flash resources is full.
The MFP cannot collate the job
because the memory is full.
The MFP depletes its memory while it
attempts to restore held jobs. The
message appears once.
Held jobs are deleted in order to
process the current job.
The message appears once per job.
The MFP is processing data, but the
memory used to store pages is full.
Attendance messages
102
Action
Touch Continue to clear the message and
continue printing. The MFP does not
automatically reprint the page that prompted the
message.
Make sure the Paper Size setting in the Paper
Menu is correct for the size of print media used.
If MP Feeder Size is set to Universal, make sure
the print media is large enough for the formatted
data.
Touch Cancel Job to cancel the current job if
needed.
Touch Continue to disable Resource Save and
continue printing.
Install additional memory.
Touch Continue to clear the message.
To perform the defragment operation, install
additional memory, or delete fonts, macros, and
other data to free some memory space.
Touch Reset Active Bin to change to another
linked bin.
Touch Continue to print the pages processed
before the memory became full. Some memory
frees up, so collating begins for the remainder of
the print job.
For example, if a 50-page print job is sent, and
10 copies are requested, and the MFP runs out
of memory at page 30, pages 1–30 would
collate and print 10 copies. The MFP would then
print and collate pages 31–50 and print 10
copies of these pages.
Some held jobs are not restored. They stay on
the hard disk and are inaccessible.
Touch Continue to clear the message and
continue printing.
To avoid this error in the future for other jobs,
install more memory.
Touch Cancel Job to cancel the current job if
needed.
To avoid this error in the future:
Simplify the print job by reducing the amount of
text or graphics on a page and deleting
unnecessary downloaded fonts or macros.
Install additional memory.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.