Lexmark X644E Menus And Messages Manual page 105

Message
58 Too many flash
options installed
58 Too many trays
attached
59 Incompatible duplex
59 Incompatible envelope
feeder
59 Incompatible tray [x] An unsupported optional drawer and
61 Remove defective disk The MFP detects a defective hard
62 Disk full
63 Unformatted disk
Understanding MFP messages
Meaning
The MFP detects an excess of
optional flash memory cards installed.
The MFP detects that too many
optional drawers and their matching
trays are installed.
An unsupported optional duplex unit
is attached to the MFP.
An unsupported optional envelope
feeder is attached to the MFP.
its matching tray are attached to the
MFP.
disk.
The MFP detects that there is not
enough memory or space on the hard
disk to store the data of the print job.
The hard disk is not formatted.
Attendance messages
105
Action
Touch Continue to clear the message and
ignore the extra optional flash memory cards.
The message occurs again unless the excess
optional flash memory cards are removed.
1 Turn the MFP off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly
grounded outlet.
5 Turn the MFP on.
1 Turn the MFP off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional drawers.
4 Connect the power cord to a properly
grounded outlet.
5 Turn the MFP on.
Remove the optional duplex unit.
The MFP ceases normal functions until the
optional duplex unit is removed.
Touch Continue to clear the message once the
optional duplex unit is removed.
Remove the optional envelope feeder.
The MFP ceases normal functions until the
optional envelope feeder is removed.
Touch Continue to clear the message once the
optional envelope feeder is removed.
Remove the optional drawer.
The MFP ceases normal functions until the
optional drawer is removed.
Touch Continue to clear the message once the
optional drawer is removed.
1 Turn the MFP off.
2 Unplug the power cord from the wall outlet.
3 Remove the defective hard disk.
4 Install a new hard disk.
5 Connect the power cord to a properly
grounded outlet.
6 Turn the MFP on.
Touch Continue to clear the message and
continue processing the current print job. Any
information not previously stored on the hard
disk is deleted.
• Delete fonts, macros, and other data stored
on the hard disk.
• Install a hard disk with a larger memory
capacity.
Format the hard disk prior to performing
operations that require the hard disk.
If the message remains, the hard disk may be
defective and require replacing.