Table of Contents
Advertisement
Specifications
Power supply
Power consumption (Max.)
Fuse rating
LED type
DMX channels
Pan range
Tilt range
Dimensions
Weight
Laser & LED safety standard
Troubleshooting
No power (mains)
No LED display
No light output
No strobe output
Unresponsive to DMX
Overheating/
cutting out
This product is classed as Electrical or Electronic equipment and should not be disposed
with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
110-240Vac, 50/60Hz (IEC)
100W
F7A
4 x 10W CREE® Quad-colour (RGBW)
6, 12, 14 or 27
540° per head
270° per head
320 x 320 x 250mm
7kg
BSEN62471:2008
Check mains voltage is correct and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
Press any control panel button and check LED setting in menu
Check control panel mode settings (standby, slave, sensitivity, DMX)
Check DMX settings from controller (dimmer levels, blackout etc.)
Check strobe settings on control panel or from DMX controller
Check DMX connection and leads
Check that DMX mode is enabled (set "Addr" on control panel)
Ensure that the unit is not too close to a heat source
Ensure that adequate airflow is afforded for cooling
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.
150.451UK User Manual
Advertisement
Table of Contents
