EGO Power+ Operating Manual page 19

STARTING/STOPPING THE LINE TRIMMER
Before starting the line trimmer
◾ ◾
Make sure you have a secure and balanced footing.
◾ ◾
Stand upright and hold the line trimmer in a relaxed position.
◾ ◾
Make sure that the cutting line is not touching the ground or any other objects.
◾ ◾
Hold the line trimmer with both hands: One hand on the rear handle and one hand
on the front-assist handle.
To start the line trimmer
(Fig. 10)
1. Press down the lock-off lever and
hold it in that position.
2. Depress the trigger to turn on the
line trimmer.
The motor runs only when the
lock-off lever and trigger are
operated simultaneously.
To stop the line trimmer
Release the lock-off lever and trigger to stop the line trimmer.
WARNING:
during work breaks and after finishing work.
USING THE LINE TRIMMER
WARNING:
all times when operating this unit. Wear a face mask or dust mask in dusty locations.
Clear the area to be cut before each use. Remove all objects, such as rocks, broken
glass, nails, wire, or line, that can be thrown or become entangled in the cutting
attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all
children, bystanders and pets at least 30m away; there still may be risk to bystanders
from thrown objects. Bystanders should be encouraged to wear eye protection. If you
are approached, stop the motor and cutting attachment immediately.
Always remove the battery pack from the line trimmer
To avoid serious personal injury, wear goggles or safety glasses at
56V LITHIUM-ION CORDLESS LINE TRIMMER
10
Lock-off Lever
Trigger
19