You Do Not Hear Sound - Cochlear Nucleus CP810 Troubleshooting Manual

You do not hear sound

Suggested actions:
Step 1: Make sure you are in an environment that is loud enough
for you to hear.
If this solved the problem, you're done. If not, continue.
Step 2: Change settings:
•
•
•
If you have a remote assistant, check and adjust the
accessory/microphone and telecoil/microphone mixing
levels away from 100%.
If this solved the problem, you're done. If not, continue.
Step 3: If you have noticed a gradual loss of sound or sound
quality, try changing the microphone protectors.
If this solved the problem, you're done. If not, continue.
Step 4: Complete the steps described in Perform a maintenance
check.
If this solved the problem, you're done. If not, continue.
Step 5: If you have a remote assistant, reset your processor's
settings. This will return all system settings to the values
set by your clinician.
If this solved the problem, you're done. If not, continue.
Step 6: Contact your clinician.
© Cochlear Limited 2010
Try a different program.
Check and adjust volume.
Check and adjust sensitivity.
Troubleshoot your processor
CP810 and CR110 Troubleshooting Guide - 25