Printhead Skew - Level 1 - Lexmark 4039-1XX Service Manual

4039-1XX

Printhead Skew - Level 1

1. Loosen the mounting screws [A].
2. Pivot the printhead around the shoulder screw [B] until the skew
marks on the printout are parallel to the top edge of the paper.
Use Print Test 1 or Quick Test to check this. Rotating the
printhead clockwise will lower the left skew adjustment point on
the test print.
3. Tighten the screws.
4. Install the top cover and print another page to verify the
adjustment.
B
Skew Adjustment Points
A
Repair Information
59