Transfer Roll Housing Removal - Lexmark 4039-1XX Service Manual

4039-1XX

Transfer Roll Housing Removal

1. Remove the print cartridge.
2. Remove the fuser input guide.
3. Grasp the housing and pull toward the front of the machine to
disconnect the housing from the mounting studs, visible through
openings [B] in the inner deflector.
4. Lift the transfer roll housing far enough to disconnect the system
cable.
5. Lift the transfer roll housing out of the machine.
6. To replace the transfer roll housing, perform the removal
procedure in reverse order. After replacing the Transfer Roll
Housing, open the top cover, power the machine off then on, to
ensure the erase lamps flash off and on.
94
Service Manual