Paper Specification; Printable Area; Character Specification - Sam4s ER-900 Series Service Manual

2-3 Thermal Printer Specifications

2-3-2 Paper Specification

Item
Paper Type
Paper Size
Specified Paper
Note: The following paper can be used instead of the specified paper above.
TF50KS-E2D: Nippon paper industries Co.,Ltd.
PD 160R-63 : New Oji paper Mfg, Co.,Ltd.
KT55F20 : Papier fabric August KoehlerAG

2-3-3 Printable Area

The Printable area of a paper with width of 58.0(+0/-1mm) is 48mm(384 dots) and the space on the right and
left sides are approximately 4.75mm.
d

2-3-4 Character Specification

Item
Character Structure
Character Size
Column Pitch
Line Pitch
Number of Column
SAM4S ER-900/SPS-300 SERIES
• Single-ply Thermal Paper Roll
• 58.0 +0/-1mm (Width) ×80 mm or less
• Original Paper No : HPK-110 (Hansol paper XT)
Table2-4 Paper Specification
a
b
c
Figure2-3 Printable Area
• 12(W) × 24(H) Font (Including a Horizontal)
• 1.25 mm(W) ×3.0 mm(H)
• 1.5 mm
• 3.75 mm (Including 6-dot Line Spacing)
• 32 (12×24 Dots/Character)
Table2-5 Character Specification
Description
a = 58.0 +0/-1mm (Paper Width)
b = 0.125 mm (1 Dot)
c = 48 mm (384 Dots/Printable Area)
d = 5.0 mm (Left Space)
e = 5.0 mm (Right Space)
e
Description
2 Product Specifications
Remark
Remark
2-5