Additional Safety Instructions For Your Battery Charger - Worx WX252 Safety And Operating Manual

battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified
10
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SAFETY WARNINGS FOR SCREWDRIVERS AND
IMPACT WRENCHES
1. Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock
GENERAL SAFETY WARNINGS FOR YOUR BATTERY
CHARGER
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do
not play with the appliance.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR
BATTERY CHARGER
1. Before charging, read the instructions.
2. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
3. The battery terminal not connected to the chassis
has to be connected first. The other connection is to
be made to the chassis, remote from the battery and
fuel line. The battery charger is then to be connected
to the supply mains.
4. After charging, disconnect the battery charger
from the supply mains. Then remove the chassis
connection and then the battery connection.
5. Do not charge a leaking battery.
6. Do not use chargers for works other than those for
which they are designed.
7. Before charging, ensure your charger is matching
the local AC supply.
8. The charging device must be protected from
moisture.