Morso 1412 Instructions For Installation And Use Manual page 10

5. Refuelling of your stove should be done while there
are still glowing embers in the bed. Spread the em-
bers across the bottom, but concentrated mostly to-
wards the front of the stove.
6. Place three pieces of fuel weighing roughly 0.6 kg and
measuring about 5 cm in length across the coals in
one layer, with spacing of roughly 1 cm between the
pieces of wood.
7. When the secondary air supply (top vent) is opened all
the way and the door is closed, the new fuel will ignite
in a few minutes.
8. Once the new fuel has taken, adjust the secondary air
amount to the desired setting; optimal combustion will
continue until glowing charcoals are produced.
Under normal chimney draft conditions, expect to re-
fuel your stove every 60 - 70 minutes.
9. A new charge of wood can be added by repeating steps
5 & 6.
10