Amperes DP2406 Instruction Manual

Amperes DP2406 Instruction Manual

4 ch 60w 100v

Advertisement

Quick Links

INSTRUCTION MANUAL
DP2406
4 CH 60W 100V Multi Channel Ampli er
Thank you
for choosing another quality product from Amperes Electronics.
DP2000 Series are the new models of amplifiers which had been further refined to meet the market demands. DP2406 is
a quad channel version with 60W 100V output per channel whereas DP2212 shall be dual channel with output capacity of
120W 100V per channel.
Class D power engine is the core driver of the DP2000 series, which has various advantages over conventional circuitries,
among them are the higher amplification efficiency thus emitting lesser heat and current draw, flatter frequency response
and able to withstand higher operating temperature while maintaining its amplification characteristics.
It is most suitable for application in Matrix paging setup, where multiple channels of amplifiers are required. In system
which has small load for each channel, DP2000 amplifiers shall be the right choice as the unit count shall be greatly
reduced, which translates into rack space savings.
Ver 1 / 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DP2406 and is the answer not in the manual?

Questions and answers

Summary of Contents for Amperes DP2406

  • Page 1 Amperes Electronics. DP2000 Series are the new models of amplifiers which had been further refined to meet the market demands. DP2406 is a quad channel version with 60W 100V output per channel whereas DP2212 shall be dual channel with output capacity of 120W 100V per channel.
  • Page 2: Parts Identifications

    However the total load should not exceed the nominal power output rating of the amplifier. Do not parallel two power amplifiers in order to gain higher power rating as this may cause overloading in the event that any one of them failed. PAGE 2 AMPERES DP2406 MULTICHANNEL POWER AMPLIFIER...
  • Page 3 Output volume is adjustable from -15 dB to 0 dB 16. INPUT JACKS (CHANNEL 3) Incoming signal to the unit is via 3 pin XLR female socket & the adjacent male jacks is connected parallel for linkage to the next unit. AMPERES DP2406 MULTICHANNEL POWER AMPLIFIER PAGE 3...
  • Page 4: Unit Installation

    MULTIPLE INPUT SOURCES MxP2188 MxP 2188 CH 4 CH 2 CH 3 CH 1 DP2406 DP 2406 PUBLIC ADDRESS POWER AMPLIFIER 2 x 120W POWER AMPLIFIER CH 2 CH 4 CH 1 CH 3 SPEAKER PAGE 4 AMPERES DP2406 MULTICHANNEL POWER AMPLIFIER...
  • Page 5 CAT5E AUDIO + DATA PD1240 TD6080 100V LINE OUT TIME OUT 5 MIN LINE / MIC OUTPUT MASTER / SLAVE ZONE OUTPUT DC 24V DA2208 -------- DP2406 ZONE 1 ZONE 8 SPEAKERS DP2406 AMPERES DP2406 MULTICHANNEL POWER AMPLIFIER PAGE 5...
  • Page 6: Audio Signal Inputs

    STAND BY CH 1 AMP O/P NOTE: The above diagram shows an application using matrix and AX3700 changeover with DP2406. One of the channel of DP2406 serves as a standby amplifier whereas other 3 channels serve respective zones. PAGE 6...
  • Page 7: Summary Of Features

    Thermal, Short Circuit AC & DC Fuse Indicator Power, Audio Input Level, Over temperature, Amplifier Faulty Cooling system Via Continuous Operating Fan Dimension (WxHxD) 430 x 88 x 300 mm Weight 13.3 kg AMPERES DP2406 MULTICHANNEL POWER AMPLIFIER PAGE 7...
  • Page 8: Warranty Conditions

    Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor, Malaysia or its authorized master distributor, TNT Links Sdn Bhd / MyPA Systems Sdn Bhd.

Table of Contents