Table of Contents
Advertisement
12. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~SATA6G_4)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
EMB-Q87A SATA 6.0Gb/s connectors
NOTES:
• You must install Windows
Serial ATA hard disk drives.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.6 SATA Configuration for details.
13.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
EMB-Q87A Speaker Out Connector
14. Minicard connector
Use this connector to connect a Minicard device.
EMB-Q87A MINICARD connectors
NOTE: The Minicard device is purchased separately.
Chapter 2: Motherboard information
XP Service Pack 3 or later version before using
®
SPEAKER
Speaker Out
GND
GND
+5V
PIN 1
MINICARD2
MINICARD1
2-23
Advertisement
Table of Contents
