Programme Settings - Firegear FGP-305 Installation And Operating Instructions Manual

This guide is a "short cut" method to SETUP and OPERATE the programmable transmitter. For
detailed instructions for each feature and function, see OWNER"S MANUAL.
INITIAL SET-UPSET FUNCTIONS USING BUTTONS ON FRONT OFTRANSMITTER
Setting Button
OPERATION – Press MODE button on TRANSMITTER to change operating functions.
1
OTHER OPERATIONS – Press corresponding buttons on TRANSMITTER to activate functions.
Button Settings
FOR FIREGEAR FGP-305 PROGRAMMABLE TRANSMITTER
1. Remove battery cover.
2. Insert 2AAA batteries.
3. Press SETTING button.
4. Replace battery cover.
All further programming
to be made on front of
transmitter.
2
3
4
SU
NITE
ON OFF THERMO PROGRAM
2
1 3 4
QUICK SET-UP GUIDE
WE
OVERRIDE HOLD
AM
TIME
FLAME
1 ON indicates the system is on, either manually or
thermostatically.
2 OFF indicates the entire system is turned off.
3 THERMO indicates the system will automatically
cycle ON/OFF, depending on programmed SET
temperature.
4 PROGRAM indicates the system is operating with

PROGRAMME settings.

TIME OF DAY – Press TIMER/TIME button for less than ONE second.
TIME OPERATION – Press and hold TIMER/TIME button for two seconds.
COUNTDOWN TIME -- pressing UP or DOWN buttons.
NOTE: Press SET button to stop LCD Digits from flashing.
1. SCALE (DEGREE F/ DEGREE C) –
Press UP or DOWN button. Press
SET button.
2. DAY OF WEEK – Press AHEAD or
BACK button. Press SET button.
3. HOUR OF DAY – Press UP or
DOWN button. Press SET button.
NOTE: AM or PM on LCD.
4. MIN. OF DAY – Press UP or DOWN
button. Press SET button.
NOTE: Each SETTING will flash,
separately, on LCD screen. After each
must push SET button.
SETTING you
You may not have to change factory
setting, but you must push SET
button.
REV 8/21/06 Page 15 of 16