Pandigital PhotoLink PANSCN04 User Manual page 15

3. Gently push the original into the feeding slot and let go when
it begins to feed through the slot.
The power indicator light blinks while scanning.
When scanning is completed, the indicator light will continue to
blink momentarily indicating that the scanner is processing the
image and storing the file onto the memory card.
CAUTION: Insert only one original at a time, and insert the
next original only when the previous one is done
and the blinking has stopped, otherwise the
scanner may malfunction.
Notes:
Do not remove the memory card or disconnect the power
supply while the indicators are blinking.
This scanner only supports output images in JPEG (.jpg)
format, and the date/ time attribute will not be added.
For more information on how this scanner stores the
scanned image files on the memory card, refer to
"Orientation" on page 12.
If the memory card is near full (lower than 1MB), the
power indicator light blinks. Use another card or delete
some files on it if necessary.
CAUTION: Do not scan glossy photos in humid environments
(humidity higher than 70% RH); the surface of the
photo will become sticky and may cause the
scanner to jam.
2. With the side to be scanned facing upward
and in correct orientation, align the left
edge of the photo against the left edge of
the feed slot, and then adjust the guide
lever so that it is against the right side of
the photo.
15