Cleaning The Image Sensor - Pandigital PhotoLink PANSCN04 User Manual

5. Insert the supplied roller cleaning tool.

Cleaning the Image Sensor

1. Clean the scanner's outer casing first, using only the
2. With the scanner powered off and disconnected from the
Note: Make sure that there is no visible dust on the swab
28
The cleaning tool will be brought into the feeding slot
automatically, and the cleaning process will begin.
When the cleaning process is completed, the cleaning tool
will be ejected from the feeding slot.
recommended and supplied tools.
power supply, insert the sensor cleaning swab into one
end of the output slot.
before inserting it into the output slot.