Invacare Colibri Service Manual page 28

SERVICE MANUAL
·
The batteries (1) are held by clips (2) which are fixed by Phillips screws (3).
·
Loosen the Phillips screws (3) and remove the clips (2).
·
The batteries can now be removed and replaced.
·
Install the two new batteries into the battery box and secure it with the clips (2).
·
Connect the cable harness to the battery terminals.
- 12 Ah batteries: Pull the plugs from the battery terminals.
- 18 Ah batteries: Loosen the screws and nuts with two open-ended spanners.
·
Connect the cable harness from the batteries in the following order:
(-) BLACK
(+) RED
(+) WHITE
(-) WHITE
·
Replace the cover of the battery box and secure with the twelve mounting screws.
·
Reinstall the battery boxes on to the scooter frame (chapter 6.3.2).
28
Cable (A) to the battery terminal (-) on the right battery
Cable (B) to the battery terminal (+). on the left battery
Cable (C) to the battery terminal (+). on the right battery
Cable (D) to the battery terminal (-) on the left battery
®
Invacare - Colibri