Invacare Colibri Service Manual page 19

®
Invacare - Colibri
Requirements:
· Phillips screwdriver
· Supporting wooden block
· To adapt the drive program: programming software or hand programming device and
electronics system installation manual, available from Invacare®.
From the operation manual
· Remove the seat.
· Remove the battery boxes.
· Remove the drive unit.
Further works:
· Place the chassis (1) upright on its seat
adapter (2).
The cover (3) of the electric module is located on
the underside of the chassis.
· Secure the chassis against falling over.
SERVICE MANUAL
19