Invacare Colibri Service Manual page 24

SERVICE MANUAL
· Remove plug (1) from the operating console.
· Replace operating console.
· Remove drive lever (1).
· Remove potentiometer plug (2) from the
operating console.
· Remove potentiometer (3).
· Set the potentiometer to the middle position
(see below).
· Reassembly takes place in the reverse order.
· Complete reassembly of vehicle.
· Check all operating console displays.
Setting the potentiometer to the middle
position:
· Loosen the bolts (1) on the drive lever
mounting.
· Twist the potentiometer shaft (2) until the
same resistance (approx. 5kOhm) is
measured between the central connection
cable (3) and both outputs (4).
· Retighten the bolts on the drive lever
mounting.
· Check settings and repeat the adjustment if
necessary.
·
Reassembly of the operating console takes
place in reverse order.
·
Check all functions (trial run).
24
®
Invacare - Colibri