Advertisement
Quick Links
MODELNO.
PIRF Range
C
874/2012
evenTUAllY, YOU mAY wAnT TO ReplACe THiS pRODUCT:
Regulations require the recycling of Waste from Electrical and Electronic Equipment (European "WEEE
Directive" effective August 2005—UK WEEE Regulations effective 2nd January 2007). Environment Agency
Registered Producer: WEE/GA0248QZ.
WHEn yoUR PRoDUcT coMEs To THE EnD oF ITs LIFE oR yoU cHoosE To REPLAcE IT, PLEAsE REcycLE IT
WHERE FAcILITIEs ExIsT - Do noT DIsPosE WITH HoUsEHoLD WAsTE.
iF YOU expeRienCe pROBlemS:
If you believe your product is defective, please return it to the place where you bought it. our Technical Team
will gladly advise on any Eterna Lighting product, but may not be able to give specific instructions regarding
individual installations.
Issue 2013
Helpline:
• T: 01933 673 144
• F: 01933 678 083
• e: sales@eterna-lighting.co.uk
PIRF120BK / WH
PIRF400BK / WH
MODELNO.
MODELNO.
A
++
C
XXX
XXX
120
400
kWh/1000h
kWh/1000h
1M
Visit our website:
www.eterna-lighting.co.uk
A
++
C
PIRF120WH
pack contents:
1 x Floodlight
1 x Linear Halogen Lamp
piRF120BK / piRF120wH / piRF400BK / piRF400wH
120w / 400w 180º piR Halogen Floodlights
pleASe ReAD THeSe inSTRUCTiOnS BeFORe USinG YOUR new FiTTinG
inSTAllATiOn inSTRUCTiOnS
A guide for qualified electricians
PIRF400BK
Model:
These instructions are provided as a guideline to assist you.
pleASe ReTAin FOR FUTURe ReFeRenCe
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Eterna PIRF120BK
Summary of Contents for Eterna PIRF120BK
- Page 1 If you believe your product is defective, please return it to the place where you bought it. our Technical Team 1 x Floodlight will gladly advise on any Eterna Lighting product, but may not be able to give specific instructions regarding Model: 1 x Linear Halogen Lamp individual installations.
- Page 2 (not wet) cloth. is fit for the purpose for which you have intended Lamp Cover Screw it. Eterna Lighting cannot accept any liability for • Do not use any chemical or abrasive cleaners. Fig 4...
- Page 3 Fig 5 TROUBleSHOOTinG AnD USeR HinTS: inSTAllATiOn: note: all passive infra red detectors are more sensitive in cold and dry weather than warm and wet weather. When installing the PIR flood light refer to Fig.4 on the previous page. pROBlem pOSSiBle CAUSe SUGGeSTeD RemeDY 01) switch off the mains before commencing...
- Page 4 • Power required: 230V~ 50 Hz • Replace front safety glass ensuring gasket is fitted • Maximum load: 120W R7s Linear Halogen correctly and secure with single screw. (PIRF120BK / PIRF120WH) • Restore power. • Maximum load: 400W R7s Linear Halogen (PIRF400BK / PIRF400WH) ReplACemenT lAmp TYpe: •...
Need help?
Do you have a question about the PIRF120BK and is the answer not in the manual?
Questions and answers