Download Print this page

Eterna PIRF500180 Installation Instructions

Pir halogen floodlight 180 degrees with over-ride

Advertisement

Quick Links

Cleaning:
>
Disconnect the power and clean the exterior only of this fitting with a moist ( not wet ) cloth.
>
Do not use any chemical or abrasive cleaners.
Lamp replacement:
>
Switch off the electricity at the mains.
>
Undo the screw at the top of the glass safety shield and allow to hang down on the hinge.
>
Remove and replace lamp, do not touch with bare fingers, grip the lamp with a tissue or clean soft cloth.
>
Replace the glass safety shield and tighten the retaining screw. Ensure that the gasket is positioned correctly.
>
Restore the power and switch on.
Replacement lamp type:
PIRF500180
Wattage:
500 W
Supply Voltage:
230 V
Type:
Double ended linear Halogen
Eventually, you may want to replace this light fitting:
When your light fitting comes to the end of it's life or you choose to update or upgrade it by
replacing it, please do not dispose of it with your normal household waste, please recycle where
facilities exist. When you need to dispose of this fitting, check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment ( European "WEEE Directive" effective August 2005—UK WEEE Regulations effective
2nd January 2007 ).
If you experience problems:
If your light is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline
for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to
give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Help line:
Tel: 01933 673 144
Fax: 01933 678 083
For answers to frequently asked questions ( FAQs ) and other information visit our web-site
www.eterna-lighting.co.uk
Email: sales@eterna-lighting.co.uk
PIR Halogen Floodlight
180° with over-ride
Model(s)
PIRF500180
Pack contents:
Halogen floodlight with integral PIR
1
Linear Halogen Lamp
1
PLEASE READ THESE INSTRUCTIONS BEFORE
INSTALLING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
- -

Advertisement

loading
Need help?

Need help?

Do you have a question about the PIRF500180 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Eterna PIRF500180

  • Page 1 If your light is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to give specific instructions regarding individual installations.
  • Page 2 Read this first: Walk test made. After you have completed your installation there until they locate in the threaded cable entry and tighten are electrical tests that should be carried out: these the nut sufficiently to grip the cable and make the entry tests are specified in the Wiring Regulations water-tight.
  • Page 3 Lamp Cover Screw Gland Anchorage Power Cable Lock Nut Terminal Block Wall Mounting Support Screws(x 2pcs) Junction Box Cover Screws(x 4pcs) Wall Mounting Support White(Lamp Wire) Black(PIR Wire) Fig. 2 Yellow/Green(Lamp Yellow/Green(Power Wire) Cable) White(Lamp Wire) Blue(Power Cable) Blue(PIR Wire) Brown(Power Cable) Brown(PIR Wire) 2.5 Meters...