Advertisement
Quick Links
Cleaning:
>
Disconnect the power and clean the exterior only of this fitting with a moist ( not wet ) cloth.
>
Do not use any chemical or abrasive cleaners.
Lamp replacement:
>
Switch off the electricity at the mains.
>
Remove front cover.
>
Remove and replace lamp.
>
Secure cover.
>
Restore the power and switch on.
Replacement lamp type:
Wattage:
70 W
Supply Voltage:
240 V
Type:
SON—I E27 ( ES )
Eventually, you may want to replace this light fitting:
When your light fitting comes to the end of it's life or you choose to update or upgrade it
by replacing it, please do not dispose of it with your normal household waste, please
recycle where facilities exist. When you need to dispose of this fitting, check with your
retailer or local authority for suitable options. New regulations will encourage the
recycling of Waste from Electrical and Electronic Equipment ( European "WEEE
Directive" effective August 2005 ).
If you experience problems:
If your light is defective or develops a fault, please return it to the place where you bought it. You can call
our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product
but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Help line:
Tel: 01933 673 144
Fax: 01933 678 083
For answers to frequently asked questions ( FAQs ) and other information visit our web-site
www.eterna-lighting.co.uk
Email: sales@eterna-lighting.co.uk
70W SON floodlight
Model(s)
SAP70MINI
Pack contents:
Flood light fitting
1
PLEASE READ THESE INSTRUCTIONS BEFORE
INSTALLING YOUR NEW FITTING
- -
PLEASE RETAIN FOR FUTURE REFERENCE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Eterna SAP70MINI
Summary of Contents for Eterna SAP70MINI
- Page 1 If your light is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to give specific instructions regarding individual installations.
- Page 2 Read this first: Installation: > Loosen the two screws and lift off the front If in any doubt, consult a qualified cover. electrician. Remove the two screws that retain the reflector > Switch off the mains before commencing and lift it away. installation and remove the appropriate circuit Choose the position of the fixing holes in the fuse.
Need help?
Do you have a question about the SAP70MINI and is the answer not in the manual?
Questions and answers