Connection Status - L2Tp - LevelOne NetCon WBR-3408 User Manual

Wireless Broadband router User Guide
Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh

Connection Status - L2TP

If using L2TP, a screen like the following example will be displayed when the "Con-
nection Details" button is clicked.
Data - L2TP Screen
Internet
Physical Ad-
dress
•
The Connection Log shows status messages relating to
the existing connection.
•
The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen.
If not connected, establish a connection to your ISP.
If connected to your ISP, terminate the connection.
Delete all data currently in the Log. This will make it easier to
read new messages.
Update the data on screen.
Figure 23: L2TP Status Screen
The hardware address of this device, as seen by remote
devices on the Internet. (This is different to the hardware
address seen by devices on the local LAN.)
40