4.10 Changing Default Settings - Datalogic DRAGON D131 Reference Manual

CONFIGURATION
4

4.10 CHANGING DEFAULT SETTINGS

Once your reader is setup, you can change the default parameters to meet your
application needs. Refer to the preceding paragraphs for initial configuration in order
to set the default values and select the interface for your application.
In this manual, the configuration parameters are divided into logical groups making it
easy to find the desired function based on its reference group.
The first four groups are for Standard Interface parameter configuration for all
Dragon™ D131 series readers and Dragon™ M131/OM-30X0 Stand Alone
configurations only:
RS232
USB
WEDGE
PEN EMULATION
NETWORK PARAMETERS are available only for OM-3000 Network configurations.
The following parameter groups are common to all interface applications:
DATA FORMAT parameters regard the messages sent to the Host system for all
interfaces except Pen Emulation.
POWER SAVE manages overall current consumption in the reading device.
READING PARAMETERS control various operating modes and indicator status
functioning.
DECODING PARAMETERS maintain correct barcode decoding in certain special
reading conditions.
CODE SELECTION parameters allow configuration of a personalized mix of codes,
code families and their options.
ADVANCED FORMATTING PARAMETERS allow code concatenation and
advanced formatting of messages towards the Host. It cannot be used with Pen
Emulation connections.
RADIO PARAMETERS (M131 series only) allow configuration of radio control
parameters.
DISPLAY PARAMETERS (some M131 series models only) allow configuration of
reader display parameters.
33