Table of Contents
Advertisement
INSTALLATION
Follow the given procedure for correct cable insertion:
Align
1
Slip the cover over the cable.
Push the rubber boot completely over the connector. Take care that the rubber
boot ma
rk is aligned to the connector clip.
Pull the rubber boot towards the connector until it covers and is flush with the
connector moulding.
Lock the rubber boot clip around the r
figure.
Insert the assembly (connector + rubber boot locked through clip) into the reader
connector. Push
hook over the yellow tooth therefore closing the handle.
Insert the strain re
Insert the
screw into the strain relief and tighten to fix the whole assembly to the
reader ha
ndle.
Connections should always be made with power OFF!
CAUTION
2
the cover along the cable towards the reader handle and make it
lief into the cover.
Align
3
4
ubber boot aligning them as shown in the
2
5
6
7
3
Hide quick links:
Advertisement
Table of Contents
